Honda CRV Ball Joints Buying Guide

Stress tested, Road ready, Restore your vehicle's original performance, handling, and control with high-quality duralast control arms. These control arms are perfect for helping maintain proper wheel rotation and stability while driving. The ball joints are part of the chassis of a car. It can balance the wheel for actual adjustment and if it is not from a good company. It might cause your car's accident or damages. Honda CRV ball joints are the preferred choice of many professional technicians and incorporate proven design and advanced engineering features to ensure like-new steering and suspension, simple installation, and extended service life. These are a sensitive part of a car so you must be aware of these.

1

Beck Arnley 101-6021 Ball Joint


About this item
  • Matches OE form, fit and function
  • Coated or plated for corrosion protection
  • Necessary hardware supplied as needed for a complete installation
  • Hardware functionality matches original design requirements
  • Application specific for this vehicle
2

Genuine Honda 51220-STK-A01 Suspension Ball Joint


About this item
  • CR-V '12-'14 (KA/KC/KX)
  • Genuine OEM
  • Direct fit
  • Genuine Honda Parts 51220-STK-A01 Front Ball (Lower) Joint
3

Delphi TC2627 Suspension Ball Joint, 1 Pack


About this item
  • Delphi ball joints manufactured with high quality forgings for increased strength and smooth operation
  • Ball joints utilize chloroprene rubber boots which improves durability, preventing premature failure
  • Delphi machines to Micron tolerances to guarantee durability and smooth Joint operation
  • Anti-corrosion protection applied to each part for optimum corrosion prevention and enhanced aesthetics
5

Proforged 101-10366 Front Lower Ball Joint


This product is fit for:
About this item
  • 1,000,000 MILE WARRANTY. You can install our ball joints with confidence knowing that every part we sell is backed by our industry-leading 1,000,000 mile limited warranty. We can offer this because our parts are engineered, tested, re-tested, and subject to strict quality control procedures - our quality is second to none.
  • CRAZY STRONG BALL JOINTS. Proforged ball joints are built using some of the toughest steel on the planet. Forged SAE4140 chromoly steel studs are enclosed in forged SAE1045 housings, heat treated for strength and durability, and every fit surface is CNC machined for precision fit and finish. Each unit is sealed with specially-designed CR-rubber boots for ultimate durability.
  • BUILT FOR PROFESSIONALS. Theres a reason why the most well-respected performance suspension brands use Proforged ball joints - were fanatical about quality, performance, and durability. Professionals save time and money with our competitively-priced products that outlast inferior brands. Do the job with confidence - replace your worn components with the leader in performance ball joints: Proforged.
  • WHAT IS A BALL JOINT? A ball joint is an enclosed spherical bearing that connects the control arm to the steering knuckle or spindle - it is a ball-and-socket design, just like your hip, and it needs to be replaced as it wears out. A worn ball joint causes poor handling and makes it difficult or impossible to achieve an alignment, which leads to rapid tire wear. Replacing your worn ball joints gives a noticeable improvement in steering feel, handling, and safety.
6

MOOG K500307 Ball Joint


About this item
  • PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
7

MOOG K500306 Ball Joint


About this item
  • PROBLEM SOLVER GUSHER BEARING -- Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE -- Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • GREASEABLE SOCKET -- Reduces corrosion and wear by allowing new lubricant to flush contaminants
  • ABSORBS IMPACT -- Belleville preload washer helps keep the bearing package tight as bearings wear
  • RESTORES LIKE-NEW STEERING -- Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
8

Replacement Front Lower Suspension Ball Joint Set


About this item
  • Same quality as OE for less money
  • Designed with the latest software and manufactured with modern tooling
  • Direct fit replacement
  • Installs the same as factory unit
  • Same dimensions as OE part
9

Front Suspension Lower Ball Joint LH RH Driver Passenger Pair Set 2pc Compatible with CRV


This product is fit for:
About this item
  • Same quality as OE for less money
  • Designed with the latest software and manufactured with modern tooling
  • Direct fit replacement
  • Installs the same as factory unit
  • Same dimensions as OE part
10

TRW JBJ477 Suspension Ball Joint for Toyota Sequoia: 2003-2004 and other applications Front Right Lower


This product is fit for:
About this item
  • Every TRW part has four levels of testing/technical/audit review before approval is given including endurance testing of 500K cycles
  • Low friction design restores steering and suspension systems back to their original operating performance
  • Long lasting dust covers made from the highest quality rubber, improving reliability and life-span of the part
  • For confirmed fitment of this TRW Suspension Ball Joint please verify your vehicle with the Amazon 'Check Fit' option
  • Fits: Honda CR-V: 2011, Honda CR-Z: 2011 - 2012, Toyota Sequoia: 2003 - 2004, Toyota Tundra: 2003
  • Fit type: Vehicle Specific
11

Pair Set of 2 Front Lower Suspension Ball Joints Compatible with Honda CR-V 10-11


About this item
  • Same quality as OE for less money
  • Designed with the latest software and manufactured with modern tooling
  • Direct fit replacement
  • Installs the same as factory unit
  • Same dimensions as OE part
13

Front Lower Ball Joint K500103 Fits 2007-2018 Acura RDX, 2007-2016 Honda CR-V, 2016-2019 Honda HR-V


About this item
  • STRONG AND DURABLE: Cataphoresis plated for added protection against corrosion on contaminants such as salt, dirt, or water ingress. Supplied in durable premium packaging
  • PREMIUM QUALITY: Engineered, designed, tested, and manufactured to meet or exceed OEM quality. Subjected torobust testing and stringent manufacturingto ensure optimum performance
  • EASY INSTALLATION AND PERFECT FIRST TIME FIT: All required accessories are supplied to ensure a perfect first time fit
  • A BRAND YOU CAN TRUST: Approved quality with an outstanding value. Engineered and manufactured %100 in Turkey
  • COMPATIBLE WITH: 2007-2018 Acura Rdx , 2007-2016 Honda Cr-V , 2016-2019 Honda Hr-V
14

Mevotech MS60505 X-Factor Ball Joint


About this item
  • Product Type :Auto Part
  • Package Dimensions :5.0 " L X4.9 " W X3.0 " H
  • Package Quantity :1
  • Package Weight :2.46240039482103Lbs
15

Pair Set of 2 Front Lower Suspen Ball Joints Compatible with Acura RDX Honda CR-V 07-17


About this item
  • Same quality as OE for less money
  • Designed with the latest software and manufactured with modern tooling
  • Direct fit replacement
  • Installs the same as factory unit
  • Same dimensions as OE part
16

Replacement Front Lower Suspension Ball Joint Kit


About this item
  • Same quality as OE for less money
  • Designed with the latest software and manufactured with modern tooling
  • Direct fit replacement
  • Installs the same as factory unit
  • Same dimensions as OE part
17

Pair Set of 2 Front Lower Ball Joints Compatible with Acura RDX Honda CR-V


This product is fit for:
About this item
  • Same quality as OE for less money
  • Designed with the latest software and manufactured with modern tooling
  • Direct fit replacement
  • Installs the same as factory unit
  • Same dimensions as OE part
Thanks for reading this post. From this article you will find best Honda CRV Ball Joints. Also you can read How to replace ball joints on Honda CR-V. If you have any opinion don't hesitate to comment here. Also please subscribe our newsletter to get more updates.
Select your car to get specific car parts
Loading...
;