Best Rear Bumper for Jeep JK with Reviews, Buying Guide and FAQs

The bumper of an automobile is more than just a decorative element. A strong bumper will assist keep repair expenses down in the case of a minor incident while also keeping you safe. The front and rear bumpers are solid structures affixed to the most visible area of the vehicle body. Its purpose is to reduce impact in the event of a crash, which helps to reduce vehicle damage while also protecting you and your occupants safe. Bumpers are made to cover a large area on both the front and rear of the car to fit the variable elevations and degrees of projection of different models.

If you want the most polished and nicest Rear bumper for Jeep Jk, you have numerous options. The list below is the one we'll look over today to locate the best fit for your vehicle.

Best Rear Bumper For Jeep Jk Comparison Table

Image Name Details Action
DV8 Offroad | Full Width Rear Bumper with Flush Mount LED Lights for 07-18 Wrangler JK | Black Finish Details Check Price
Nilight - JK-52A Rear Bumper Compatible for 2007-2018 Jeep Wrangler JK,Rock Crawler Bumper with Hitch Receiver & 2X Upgraded 40W LED Lights Off Road Textured Black,2 years Warranty Details Check Price
LEDKINGDOMUS Rear Bumper Compatible with 07-18 Jeep Wrangler JK and JK Unlimited with 2x LED Lights & 2" Hitch Receiver Textured Black Details Check Price
OEDRO Off Road Rear Bumper Combo Compatible with 2007-2018 Jeep Wrangler JK & JKU Unlimited (2/4 Doors), Full Width Back Bumper with Hitch Receiver & 2 x D-Rings Details Check Price
EAG Rear Bumper with Tire Carrier Fit for 07-18 Wrangler JK Details Check Price
YITAMOTOR Rock Crawler Rear Bumper Compatible with 07-18 Jeep Wrangler JK & Unlimited with D-Ring, 2" Hitch Receiver Details Check Price
Vijay Rear Bumper With Hitch Receiver & 2x 18 LED Lights for 2018-2022 Wrangler JL/JLU Details Check Price
Redrock 4x4 Rock Crawler Rear Bumper; Textured Black Compatible with 18-22 Jeep Wrangler JL Details Check Price
RYNOSKIN Rear Bumper fit 2007-2018 Jeep Wrangler JK Rear Bar with D-Ring Shackles & 2" Hitch Receiver Bolt-on Black Rear Guard Off Road Jeep Wrangler Accessories Details Check Price
Smittybilt 76745 SRC Carbine Rear Bumper for 2007-2018 Jeep® Wrangler JK, Black Details Check Price

1. DV8 Offroad | Full Width Rear Bumper with Flush Mount LED Lights for 07-18 Wrangler JK | Black Finish

All of the DA8 bumpers have been trail tested and verified to work! Cold rolled steel in thicknesses of 3/16" and 1/4" Solid D-ring mounts with rings included, 120 wall tubing, great degree angles, and elevated corners.

The bumpers are powder coated in a textured black finish. Rear Bumper with Aluminum Tire Carry Handle Class 3 hitch and polyurethane axle for smooth functioning. Simple to install, no adjustments are required, and all necessary hardware is provided.


Features

FITMENT: Suitable with Jeep Wrangler JK models from 2007 to 2018.

BUILT TO LAST: Precisely cut and machine bent 3/16" plated steel is robotically forged to exact dimensions to assure appropriate fitment and installation with minimal adjustments.

EVERLASTING BEAUTY: A two-stage powder coat technique protects the surface from rust and UV rays while maintaining a lovely textured feel.

LIGHTING OPTIONS: 2 flush mounts LED cube lights are included in the bumper. (wiring harness sold separately

RECOVERY POINTS: A BUILT-IN CLASS 3 HITCH AND TWO WELDED D-RINGS ARE INCLUDED.

SIMPLE INSTALLATION: The installation is simple and uses new hardware to mount to the factory placement.

Pros
  • On the roads or the freeway, it offers strong angles for ample wheel travel.
  • Simple Bolt-On Installation.
  • Tire Carrier.
Cons
  • There are no safety chain loops, and there is very little place for the hook and ball if you put a spare on the rear.
  • LED lights are not long-lasting.



2. Nilight - JK-52A Rear Bumper Compatible for 2007-2018 Jeep Wrangler JK,Rock Crawler Bumper with Hitch Receiver & 2X Upgraded 40W LED Lights Off Road Textured Black,2 years Warranty

This Rear Bumper is made of a 3/16" mild steel plate and finished in two stages with resin precoating and high-grade glossy black powder painting for long-term durability. For added strength, the D-Ring mounts are forged on both the inside and outside.

Two 18W Nilight Upgraded LED Lights, two high-strength D-Ring mounts, and a 2" standard receiver hitch are included in this package.


Features

HEAVY-DUTY REAR PROTECTION: With its heavy-duty D-rings, this Bumper was designed to give protection to your Jeep's lower rear end while also giving greater towing capabilities. It also improves the aesthetics of your vehicle, adding to its overall flair.

PERFECT FOR OFF-ROAD USE: This Nilight Rear Bumper is ideal for off-road use, with 2X Nilight Upgraded LED Lights, two high-strength D-Ring mounts, and a 2" standard receiver hitch.

EXTREMELY BRIGHT: 2 pcs built-in Nilight's 18W New Design Flush Mount LED Pods have been upgraded. They add a splash of color to the road and are ideal for any nighttime trip.

EASY, BOLT-ON INSTALLATION: This Nilight Mid Width Rear Bumper is also made to be simple to use and install. This bumper attaches quickly and effortlessly without requiring any car modifications thanks to its handy bolt-on solution.

FIT TYPE: Vehicle-specific fit type

Pros
  • It is not necessary to cut or drill.
  • Up to a 37" tire package can be accommodated.
  • 2" Standard Hitch Receiver
Cons
  • It has a hefty, substantial feel about it.
  • Lights are aimed high.
  • Low towing capacity.



3. LEDKINGDOMUS Rear Bumper Compatible with 07-18 Jeep Wrangler JK and JK Unlimited with 2x LED Lights & 2" Hitch Receiver Textured Black

The "LEDKINGDOMUS Rear Bumper" is up next. This unassuming rear bumper has a few twists up its sleeve. Fits all Jeep Wrangler JK models from 2007 to 2018. Heavy-duty 5/32 steel was used in the manufacturing of this product "2" X0.12" steel tubing and cold rolled steel sheet.

Internal and exterior welding is used to create high-strength D-ring mounts. The bumper has a receiver hitch soldered to it. The one-piece welded design ensures maximum strength. The bumper was cut using a laser welding method that was precisely calculated to achieve a perfect fit. Heavy-duty material will keep your car safe even in the most extreme weather.


Features

Fitment: All 2007-2018 Jeep Wrangler JK and JK Unlimited vehicles, including 2-door and 4-door variants, are compatible with this Rear Bumper.

Heavy Still For Maximum Protection: Protects your car in severe off-road settings with robust 5/32-inch steel.

Shackle Mount and D-rings: For added strength, two strong D-ring shackle mounts are soldered to the rear bumper. With the two 4.75 Ton D-Rings, the total capacity is 9000 lbs. A 2" receiver hitch is included for towing.

Corrosion Resistant Finish: Long-lasting corrosion protection is provided by E-coat and a superior textured-black powder coating.

Installation: Designed to be a straight bolt-on accessory for trail-ready cars. This Rear Bumper is a straightforward replacement that uses all factory attachment points and does not require any cutting, welding, or construction.

Pros
  • Easy to install.
  • It's well-made and attractive.
  • The pricing is unbeatable.
Cons
  • Towing receiver setup is a little clumsy.
  • Standard towing hitch makes towing noisy.
  • The receiver is inefficient.



4. OEDRO Off Road Rear Bumper Combo Compatible with 2007-2018 Jeep Wrangler JK & JKU Unlimited (2/4 Doors), Full Width Back Bumper with Hitch Receiver & 2 x D-Rings

The OEDRO bumper not only makes your Jeep seem new and tougher, but it also protects it in the event of an accident. Each component has been deliberately created to radiate attitude - be fearless and daring. It provides a lasting sense of adventure.

Uniquely split 2-inch trailer hitch allows you to use the factory hitch or upgrade to a better quality hitch for towing racks, bags, bicycles, and load carriers, among other things. That's what you'd expect from one of the most successful off-road brands in the world.


Features

Fitment: All 2007-2018 Jeep Wrangler JK & Unlimited JKU (2/4 Doors) models are compatible with the OEDRO rear bumper combo.

Separated Trailer Hitch: Unlike other rear bumpers, this one has a trailer hitch that is distinct from the rest of the bumper. You have the option of using the factory trailer hitch or upgrading to a higher-grade hitch. Wire routing is made easier and cleaner using a special harness plug notch.

Stainless Steel Trim Panel: The classic silver trim panel can reflect light, enhancing nighttime safety. It can also be easily separated for custom painting, such as coordinating the body color or applying an individualized decal.

Functional Step Bumper: This back bumper can accommodate a spare tire up to 32 inches in diameter. It will also function as a guardrail and an anti-slip step pad.

No-Hassle Warranty: 1 rear bumper kit, 2 D-rings, 1 pair of screws, and installation instructions are included in the package. It's backed by our outstanding customer care and comes with a 1-year warranty for manufacturing faults.
Pros
  • There will be no cutting or drilling.
  • Heavy Duty.
  • Trailer Hitch has been pre-programmed.
  • Reasonable price.
  • Exceptional design.
Cons
  • Bolts Interfere with tailgates.
  • Does not work with the stock light.
  • Does not fit a 35-inch spare.



5. EAG Rear Bumper with Tire Carrier Fit for 07-18 Wrangler JK

EAG has grown into a smart automotive firm dedicated to offering the greatest items at the best prices to fellow car enthusiasts. For your off-road adventure, the EAG Rear Bumper with Tire Carrier 07-18 Wrangler JK is the ideal choice and will expedite your search for the best rear bumper for jeep jk.

The bumper can take a battering thanks to its tough design, and the tire carrier will stay stable when bouncing around the course. The EAG handle system is meticulously constructed from high-quality components to ensure years of rattle-free operation and a solid tire-swing position. To avoid catching, grinding, or freezing, all components are manufactured to exacting engineering standards.


Features

EASY-OPEN TIRE CARRIER - The heavy-duty tire carrier is likewise built to last, and it opens and closes smoothly thanks to high-quality bearings on the shaft. The tire carrier is firmly locked in place by a custom-designed billet aluminum handle, so you don't have to worry about it coming free on the trail.

PERFECT FOR OFF-ROAD USE - A spare tire carrier is included, as well as a 2" standard hitch receiver and two high-strength 4.75T D-Ring mounts. For off-road use, the EAG off-road rear bumper with tire carrier is ideal. For ultimate strength, shackle mounts are robotically forged to the bumper from both the inside and outside.

HEAVY-DUTY CONSTRUCTION - 5/32" mild steel plating was used to make this item. For long-term durability, this rear bumper is finished in a high-grade textured black powder coating.

PERFECT FOR OVER-SIZED TIRES - The EAG rear bumper with tire carrier for Wrangler JK is made of heavy-duty materials and can safely transport even the heaviest spare tires. This tire carrier can support big tires up to 40 inches due to its flexible mounting points.

Pros
  • Super easy removal and install
  • Looks very good.
  • The tire carrier is strong.
Cons
  • The coating is peeled off and rusted.
  • Mounting holes are not well drilled.



6. YITAMOTOR Rock Crawler Rear Bumper Compatible with 07-18 Jeep Wrangler JK & Unlimited with D-Ring, 2" Hitch Receiver

Different types of steel and processes are used in different bumpers. The impact strength of the bumper is determined by the different types of steel used. This rear bumper is made of heavy-duty 5/32 cold-rolled steel to withstand harsh off-road damage and provide hardcore protection for your vehicle.

They also utilize a two-stage power coating that is the thickest and most resistant to rust and corrosion.


Features

Application - Jeep Wrangler JK and JK Unlimited models from 2007 through 2018 are compatible, including 2-door and 4-door variants.

Heavy steel for Maximum Protection - The body of your car will be protected from hits in the severe off-road environment with this Rear Bumper, which is made of heavy grade 5/32 inch steel.

Shackle mount and D-rings - For added strength, two solid D-ring shackle bolts are welded into the rear bumper from both the inside and outside. A 2" receiver hitch for carrying is also included in the rear bumper.

Corrosion Resistance Finish - This bumper for the Jeep Wrangler JK has an e-coat and a powder coat finish, so it will never rust even if the coat is removed.

Bolt-on Installation - The Rock Crawler Rear Bumper was thoughtfully designed to be a direct bolt-on replacement for trail-oriented vehicles. This Rear Bumper is a direct fit replacement that uses all factory attachment points and requires no additional trimming, soldering, or construction. Installation by a professional is suggested.

Pros
  • High technology of laser cutting procedure.
  • The price is perfect.
  • D rings are included.
Cons
  • An oversized tire hits the top.
  • No bracing included.
  • The mounting is not stable.



7. Vijay Rear Bumper With Hitch Receiver & 2x 18 LED Lights for 2018-2022 Wrangler JL/JLU

The "Tioyar Textured Black Rear Bumper w/2x 18W LED Lights & Hook Receivers" looks and performs beautifully. They provide advanced three-stage black powder coating, corrosion, and durability. 5/32" deep low carbon solid steel and 2" x 0.120" high tolerance steel tubes were used to create this product.

Design for advanced texture welding. Two high-strength D-ring shackles and two 4.75T D-rings are installed in each of the front and rear bumpers. A built-in winch plate in the front bumper can support a 12,000-pound winch.


Features

Application - Fits all models of Jeep Wrangler JK and JKU from 2007 to 2017.

Rear Bumper Material - With a stronger bumper, black powder coating, corrosion resistance, and durability, 5/32 inch thick low carbon hard steel and 2-inch x 0.120-inch exact tolerance steel tube.

Extremely Bright - The JK rear bumper has a tough look and aggressive design that can handle any terrain. Two 18W lights are included for a brighter field of view.

D-rings - The maximum tension can hold 12,000 pounds thanks to two special 4.7 tons of high-strength D-rings. A 2-inch hook receiver is also included in the rear bumper. It's simple to set up. There is no need to cut anything. There is no need for drilling.

Pros
  • When you're traveling fast on the trails, it takes a lot of damage.
  • It has high corrosion resistance and toughness on the surface.
Cons
  • Rust can form on the steel beneath the surface.
  • Because the coating is not flexible, it is susceptible to cracks that allow moisture to enter.



8. Redrock 4x4 Rock Crawler Rear Bumper; Textured Black Compatible with 18-22 Jeep Wrangler JL

If you enjoy convenience, functionality, and style while off-roading, the Redrock 4x4 Rock Crawler Rear Bumper is the perfect addition to your Jeep jk. The bumper has a high clearance design, which is a significant upgrade.

The RedRock 4x4 rear bumper, built of 2-inch steel and equipped with a 2-inch receiver, is ready to face any challenge. The bumper is made of heavy-duty steel and can accommodate a 35-inch tire. Installation is simple and requires no drilling. The JK's rough black finish gives it a distinct off-road look that's only available from RedRock 4x4. Accessories & More For on-and off-road use, the integrated receiver can accept a standard 2-inch hitch.

The Redrock 4x4 Rock Crawler Rear Bumper demonstrates that Redrock knows the significance of producing high-quality materials.


Features

Redrock 4X4 Rock Crawler Rear Bumper W/2 Inch Hitch Receiver.

Heaviest duty 2" tubular steel with.12" wall tubing.

Black Powder Coated Texture finishing.

For on-and off-road use, there's a built-in 2-inch hitch.

Pros
  • Price Convenient.
  • Very simple to install.
  • This has several desirable properties and is extremely durable.
Cons
  • The holes in the D-rings are too small.



9. RYNOSKIN Rear Bumper fit 2007-2018 Jeep Wrangler JK Rear Bar with D-Ring Shackles & 2" Hitch Receiver Bolt-on Black Rear Guard Off Road Jeep Wrangler Accessories

The RYNOSKIN rear bumper is designed to provide improved rear protection while also improving the appearance of your JK. It has a rust-resistant layer and a unique texture of black coat polish applied to carbon steel. The rear bumper is made of a 3/16" steel plate and provides substantial off-road safety to the vehicle. Rynoskin also offers a hassle-free 5-year warranty against manufacturing flaws and transportation damage.


Features

HEAVY-DUTY REAR PROTECTION - 3/16" thick steel "The car is protected to the fullest extent possible by a steel plate. For further strength, the D-ring screws are riveted on both the inside and outside. Two D-ring shackles with a capacity of 4.75 tons and two Standard hitch receivers are included in the package.

EASY BOLT-ON INSTALLATION - Bolt-on design requires no drilling and is simple to install yourself with ordinary garage tools. Equipment and instructions for installation are included.

LONG-LASTING & DURABLE - The rear bumpers of RYNOSKIN are comprised of heavy-duty carbon steel. Pre-treatment, phosphating layer, 360°e-coating layer, and anti-scratch fine texture black powder coat provide excellent rust protection.

Pros
  • Before E-coating, a phosphating layer is applied to prevent re-rusting.
  • Water- and dust-resistant
Cons
  • The setup of the towing receiver is a little cumbersome.
  • Mounting hardware is not enough.



10. Smittybilt 76745 SRC Carbine Rear Bumper for 2007-2018 Jeep® Wrangler JK, Black

mid width designClass III receiver hitchRaised corners for better entry and exitAccommodates 3x3 cube LED lightsIntegrated 3/4" D-ring mounts

Features

On the bull bar, there are integrated GEN2 light mounting tabs.

Almost all winch sizes are accommodated by the open top and side design.

1.75" bull bar that can be removed.

Overrider and kickers on a 120-foot wall.

We may preserve existing factory hazard lights thanks to a fitted winch panel with two hook bolt layouts of 4.5" x 10" and 4.5" x 6".

For actual towing, use a Class III receiver hitch.

Solid 34" D-ring and jack points that are forged on both the inside and outside

Pros
  • The powder coat for wrinkles is quite thick.
  • Built to make mounting lights simple
Cons
  • The bumper attachment holes did not line up adequately with the brackets provided.



Best Rear Bumper For Jeep Jk Buying Guide:

Things to think about when purchasing a rear bumper for a Jeep JK

When it comes to purchasing a bumper, size is important, and rear bumpers come in a range of sizes, including full-width, mid-width, and stubby.

Material matters, especially when it comes to your bumper's appearance. The finest upgrade bumpers are composed of three layers: carbon steel, an electro-galvanized layer, and a powder-coated layer that protects them from oxidation.

The bumper's polish is crucial in achieving the desired appearance.

Jeep owners who prefer off-roading should be aware of and evaluate the approach angle. Essentially, the word relates to the angle at which you may drive without colliding with particular obstructions with your bumper.

Winches are dragging and raising devices that are powered by either a crank or a motor. While not all will attach a winch, trail riders and off-roaders should seriously consider it. In general, a winch should be able to support 1.5 times the vehicle weight on which it will be fitted.

Several bumpers come as standard or can be customized with slits for additional lighting, which can be a useful addition for driving at night or in misty circumstances.

Best Rear Bumper For Jeep Jk FAQ:

What style of bumper comes standard on a Jeep JK?

Jeep Bumpers come in a range of shapes and sizes, and each type is manufactured by a separate company. Stinger bumpers, Stubby bumpers, Off-road recovery bumpers, and Tubular bumpers are all available for Jeep Jk.

Is the rear bumper of a Jeep jk strong?

To survive the demands of rugged terrain, off-road bumpers are frequently overbuilt. These bumpers are stronger by construction and perform a better job keeping the back end of your Jeep.

What are the materials used in Jeep jk rear bumpers?

The majority of rear bumpers are constructed of strong steel. They occasionally come in a stamped design, like the ones found on manufactured limited edition Jeeps. They're usually formed of soldered together flat hefty gridded plates.

What exactly is a stubby bumper?

Look at the stubby bumpers. It is the smallest of the bumper width possibilities, and it usually does not go over the length of the grille.

What does it cost to repair a popped bumper?

The cost is usually between $300 and $500, although it could be more depending on how much your car's paint costs. Consider paying between $200 and $700 on average for a bumper repair.

Conclusion

The Jeep JK is one of the most capable off-road vehicles on the market. It's also difficult not to fall in love with the Jeep JK's adorable and uncomplicated design, which makes it one of the most enjoyable and capable ways to go off the beaten road or feel the breeze on your scalp.

Altogether, we hope you'll be able to locate the Best Rear Bumper For Jeep Jk. Be sure that would be the best for your car if you buy it. Now would be the time to create the greatest decision.

Select your car to get specific car parts
Loading...

About The Author

Jhony Thomas

Jhony Thomas is a freelance writer and editor who specializes in technology reporting and reviewing. He works out of the suburban New York City area. He has drivers Education and safe driving enthusiast. In the sense of car knowledge, he has the most powerful knowledge about car accessories, engine, information, news, tools and technologies. He can appreciate people to know about the car knowledge.